{"title":"dash accesory bars","description":"","products":[{"product_id":"fj-cruiser-dash-acc-bar","title":"fj cruiser dash acc bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota FJ Cruiser is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and racing use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with the grab handles, does not obstruct the driver’s sightlines, and does not block instrument visibility. This is a bolt-on upgrade that looks like it belongs there.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. This means it is compatible with the full ecosystem of RAM Mounts, Quad Lock, and the wide range of clamp-based accessories available on Amazon and at any off-road retailer. If it clamps to a 34mm tube, it works on this bar.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Racing\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere with grab handles\u003c\/strong\u003e — passenger handles remain fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — passenger airbag and curtain airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block the passenger airbag or curtain airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota FJ Cruiser 2007–2014\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota FJ Cruiser — 2007 \/ 2008 \/ 2009 \/ 2010 \/ 2011 \/ 2012 \/ 2013 \/ 2014\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated","offer_id":53156030480700,"sku":"DTR-DAB-FJC-01","price":235.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53156030513468,"sku":"DTR-DAB-FJC-02","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_5439.jpg?v=1782189407"},{"product_id":"land-cruiser-80-series-dash-acc-bar","title":"land cruiser 80 series dash acc bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota Land Cruiser 80 Series is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and racing use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with the grab handles, does not obstruct the driver’s sightlines, and does not block instrument visibility.\u003c\/p\u003e\n\u003ch2\u003eTwo Versions — Select the Right One for Your Year\u003c\/h2\u003e\n\u003cp\u003eThe Land Cruiser 80 Series received a dashboard update mid-production. Because the A-pillar mounting points differ between generations, we offer two specific versions to ensure a perfect fit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1994\u003c\/strong\u003e — fits the early-generation dashboard and A-pillar configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1995–1997\u003c\/strong\u003e — fits the updated dashboard and A-pillar configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease select your vehicle year carefully at checkout to receive the correct version for your dashboard.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer.\u003c\/p\u003e\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\u003ch2\u003eDesigned for Off-Road and Racing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere with grab handles\u003c\/strong\u003e — passenger handles remain fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price.\u003c\/strong\u003e Custom colors available upon request for an additional \u003cstrong\u003e$35\u003c\/strong\u003e — contact us before ordering to confirm availability.\u003c\/p\u003e\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\u003cp\u003eWe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersions:\u003c\/strong\u003e 1990–1994 \/ 1995–1997 — select at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, all 34mm clamp systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eToyota Land Cruiser 80 Series — 1990 1991 1992 1993 1994 (early dash) \/ 1995 1996 1997 (new dash)\u003c\/p\u003e\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"90 to 94 old dash \/ black powder coated (included)","offer_id":53174600466748,"sku":"DTR-DAB-LC80-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"90 to 94 old dash \/ special color +$35","offer_id":53174621241660,"sku":null,"price":275.0,"currency_code":"USD","in_stock":true},{"title":"95 to 97 \/ black powder coated (included)","offer_id":53174600499516,"sku":"DTR-DAB-LC80-02","price":240.0,"currency_code":"USD","in_stock":true},{"title":"95 to 97 \/ special color +$35","offer_id":53174621274428,"sku":null,"price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_3509.jpg?v=1782978354"},{"product_id":"toyota-4runner-5th-gen-dash-accessory-bar","title":"4Runner 5th Gen Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota 4Runner 5th Generation is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and racing use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with the grab handles, does not obstruct the driver’s sightlines, and does not block instrument visibility. This is a bolt-on upgrade that looks like it belongs there.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. This means it is compatible with the full ecosystem of RAM Mounts, Quad Lock, and the wide range of clamp-based accessories available on Amazon and at any off-road retailer. If it clamps to a 34mm tube, it works on this bar.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Racing\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere with grab handles\u003c\/strong\u003e — passenger handles remain fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota 4Runner 5th Generation 2014+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota 4Runner 5th Generation — 2014 \/ 2015 \/ 2016 \/ 2017 \/ 2018 \/ 2019 \/ 2020 \/ 2021 \/ 2022 \/ 2023 \/ 2024\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53179752218940,"sku":"DTR-DAB-4R5G-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53179752251708,"sku":"DTR-DAB-4R5G-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_5525.jpg?v=1783134015"},{"product_id":"toyota-4runner-4th-gen-dash-accessory-bar","title":"4Runner 4th Gen Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota 4Runner 4th Generation is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and racing use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with the grab handles, does not obstruct the driver’s sightlines, and does not block instrument visibility. This is a bolt-on upgrade that looks like it belongs there.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer. If it clamps to a 34mm tube, it works on this bar.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Racing\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere with grab handles\u003c\/strong\u003e — passenger handles remain fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota 4Runner 4th Generation 2003–2009\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota 4Runner 4th Generation — 2003 \/ 2004 \/ 2005 \/ 2006 \/ 2007 \/ 2008 \/ 2009\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53183608488252,"sku":"DTR-DAB-4R4G-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53183608521020,"sku":"DTR-DAB-4R4G-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_5502.jpg?v=1783211047"},{"product_id":"land-cruiser-100-series-dash-accessory-bar-1998-2002","title":"Land Cruiser 100 Series Dash Accessory Bar (1998-2002)","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota Land Cruiser 100 Series and Lexus LX470 is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and overland use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with the grab handles, does not obstruct the driver’s sightlines, and does not block instrument visibility.\u003c\/p\u003e\n\n\u003ch2\u003eImportant — Dashboard Generation Fitment\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eThis version is specifically engineered for the 1998–2002 Land Cruiser 100 Series dashboard.\u003c\/strong\u003e The early-generation interior features a lower, flatter center dashboard section, which determines the geometry and mounting angle of this bar.\u003c\/p\u003e\n\n\u003cp\u003eStarting in 2003, Toyota redesigned the 100 Series interior with a \u003cstrong\u003etaller, raised center dashboard stack\u003c\/strong\u003e — a significantly different configuration that requires a different bar geometry. \u003cstrong\u003eThis bar will not fit correctly on 2003 or later vehicles.\u003c\/strong\u003e If your vehicle is a 2003–2007, please contact us before ordering to confirm availability of the updated version.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Overland\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not interfere with grab handles\u003c\/strong\u003e — passenger handles remain fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDashboard Version:\u003c\/strong\u003e Early generation — low center dash stack (1998–2002 only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota Land Cruiser 100 Series and Lexus LX470 — 1998–2002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota Land Cruiser 100 Series — 1998 \/ 1999 \/ 2000 \/ 2001 \/ 2002\u003c\/p\u003e\n\u003cp\u003eLexus LX470 — 1998 \/ 1999 \/ 2000 \/ 2001 \/ 2002\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 2003–2007 models have a taller raised center dashboard stack and require a different version. Contact us before ordering if your vehicle is a 2003 or later.\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53183610618172,"sku":"DTR-DAB-LC100-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53183610650940,"sku":"DTR-DAB-LC100-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/FF5FDB80-02D0-4D55-B5DF-ED3F3727A32C.jpg?v=1783212072"},{"product_id":"toyota-tundra-sequoia-3rd-gen-dash-accessory-bar","title":"Toyota Tundra \/ Sequoia 3rd Gen Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota Tundra 3rd Generation and Toyota Sequoia 3rd Generation is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail, at the track, or on the job. Designed for off-road and heavy-duty use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with instrument visibility or driver sightlines.\u003c\/p\u003e\n\n\u003ch2\u003eTundra \/ Sequoia 3rd Gen — Important Installation Note\u003c\/h2\u003e\n\n\u003cp\u003eOn the Tundra 3rd Gen and Sequoia 3rd Gen, the factory OEM grab handle cannot be reinstalled once the bar is mounted due to the A-pillar bolt configuration. \u003cstrong\u003eThe DTR FAB bar includes a solid replacement handle that fits perfectly in the OEM space\u003c\/strong\u003e — same location, clean look, solid feel. Your passenger still has a handle. It just looks better.\u003c\/p\u003e\n\n\u003ch2\u003eOne Bar. Two Platforms.\u003c\/h2\u003e\n\n\u003cp\u003eThe Tundra 3rd Gen and Sequoia 3rd Gen share the same dashboard and A-pillar dimensions, so \u003cstrong\u003ethis single bar fits both vehicles perfectly\u003c\/strong\u003e. Same geometry, same bolt pattern, same clean install — whether you’re running a Tundra or a Sequoia.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Heavy-Duty Use\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes solid replacement grab handle\u003c\/strong\u003e — replaces OEM handle that cannot be reinstalled, fits perfectly in the factory location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Solid replacement grab handle — fits OEM location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota Tundra 3rd Gen 2022+ \/ Toyota Sequoia 3rd Gen 2023+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota Tundra 3rd Generation — 2022 \/ 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\u003cp\u003eToyota Sequoia 3rd Generation — 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Solid replacement grab handle included.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53183611601212,"sku":"DTR-DAB-TUN3G-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53183611633980,"sku":"DTR-DAB-TUN3G-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_5154.jpg?v=1783213084"},{"product_id":"toyota-4runner-6th-gen-dash-accessory-bar","title":"Toyota 4Runner 6th Gen Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota 4Runner 6th Generation is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and racing use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible with all trim levels of the 2025+ Toyota 4Runner 6th Generation\u003c\/strong\u003e — SR5, TRD Sport, TRD Off-Road, TRD Pro, Trailhunter, and Limited. One bar, every build.\u003c\/p\u003e\n\n\u003ch2\u003eEngineered Around the 6th Gen Interior\u003c\/h2\u003e\n\n\u003cp\u003eThe 4Runner 6th Gen features a redesigned interior with updated A-pillar geometry. The DTR FAB bar is \u003cstrong\u003eslightly curved\u003c\/strong\u003e to follow the natural contour of the dash and A-pillar — a deliberate design decision that keeps the bar clear of the \u003cstrong\u003epassenger airbag deployment zone\u003c\/strong\u003e. This is not a generic straight tube. It is engineered specifically for this generation to maximize usable mounting space while maintaining full airbag clearance.\u003c\/p\u003e\n\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDTR FAB dash accessory bar\u003c\/strong\u003e — slightly curved 1.37\" \/ 34mm OD tube, black powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-style grab handle\u003c\/strong\u003e — passenger side handle retained, fits the factory location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver side installation kit\u003c\/strong\u003e — complete hardware kit for the driver side mount, everything you need for a clean bolt-on install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer. If it clamps to a 34mm tube, it works on this bar.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Racing\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlightly curved tube profile\u003c\/strong\u003e — engineered to clear the passenger airbag deployment zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM grab handle retained\u003c\/strong\u003e — passenger handle stays in place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver side install kit included\u003c\/strong\u003e — complete hardware for a clean, rattle-free mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with all 6th Gen trim levels\u003c\/strong\u003e — SR5, TRD Sport, TRD Off-Road, TRD Pro, Trailhunter, Limited\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eThis bar is designed to clear the passenger airbag deployment zone. However, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — slightly curved profile, industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e OEM-style grab handle (passenger side) + driver side installation kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirbag Clearance:\u003c\/strong\u003e Tube geometry engineered to clear passenger airbag zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota 4Runner 6th Generation 2025+ — all trim levels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota 4Runner 6th Generation — 2025 and newer\u003c\/p\u003e\n\u003cp\u003eAll trim levels: SR5 \/ TRD Sport \/ TRD Off-Road \/ TRD Pro \/ Trailhunter \/ Limited\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. OEM-style grab handle and driver side install kit included.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53183614189884,"sku":"DTR-DAB-4R6G-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53183614222652,"sku":"DTR-DAB-4R6G-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_4743.jpg?v=1783215314"},{"product_id":"jeep-wrangler-jl-gladiator-jt-dash-accessory-bar","title":"Jeep Wrangler JL \u0026 Gladiator JT Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Jeep Wrangler JL and Jeep Gladiator JT is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail or at the track. Designed specifically for off-road and rock crawling use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe bar mounts directly to the factory OEM grab handles\u003c\/strong\u003e using the original handle bolt locations — no new holes, no permanent modifications, fully reversible. The OEM handles are removed and the DTR FAB bar takes their place, using the same mounting points for a clean, factory-integrated look.\u003c\/p\u003e\n\n\u003ch2\u003eJL \/ JT Generation Fitment — Two Configurations\u003c\/h2\u003e\n\n\u003cp\u003eThe Wrangler JL and Gladiator JT received interior updates across their production run. The DTR FAB bar is available in two versions to ensure a precise fit:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2018–2023\u003c\/strong\u003e — fits the early JL\/JT interior configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2024+\u003c\/strong\u003e — fits the updated JL\/JT interior configuration introduced for the 2024 model year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease select the correct year range for your vehicle at checkout.\u003c\/strong\u003e Installing the wrong version will result in improper fitment.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer. If it clamps to a 34mm tube, it works on this bar.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Rock Crawling\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory OEM grab handle bolt locations\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces OEM grab handles\u003c\/strong\u003e — uses the same mounting points for a clean, integrated install\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Wrangler JL and Gladiator JT\u003c\/strong\u003e — same bar, both platforms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory OEM grab handle bolt locations — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Jeep Wrangler JL 2018+ \/ Jeep Gladiator JT 2020+ — select year range at checkout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eJeep Wrangler JL — 2018 \/ 2019 \/ 2020 \/ 2021 \/ 2022 \/ 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\u003cp\u003eJeep Gladiator JT — 2020 \/ 2021 \/ 2022 \/ 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelect your year range at checkout: 2018–2023 or 2024+\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Bar only.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included) \/ 2018 -2023","offer_id":53184288424252,"sku":null,"price":225.0,"currency_code":"USD","in_stock":true},{"title":"black powder coated (included) \/ 2024+","offer_id":53184288457020,"sku":null,"price":225.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35 \/ 2018 -2023","offer_id":53184288489788,"sku":null,"price":260.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35 \/ 2024+","offer_id":53184288522556,"sku":null,"price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_3372.jpg?v=1783251035"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/collections\/IMG_5507.jpg?v=1786295961","url":"https:\/\/www.dtrfab4x4.com\/collections\/dash-accesory-bars.oembed","provider":"DTR fab","version":"1.0","type":"link"}