{"title":"tundra","description":"","products":[{"product_id":"toyota-tundra-sequoia-3rd-gen-dash-accessory-bar","title":"Toyota Tundra \/ Sequoia 3rd Gen Dash Accessory Bar","description":"\u003ch2\u003eYour Cockpit. Your Setup.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Dash Accessory Bar for the Toyota Tundra 3rd Generation and Toyota Sequoia 3rd Generation is the clean, purpose-built solution for mounting phones, tablets, switches, cup holders, and any other cockpit accessories you need within reach on the trail, at the track, or on the job. Designed for off-road and heavy-duty use, this bar gives you a solid, vibration-resistant mounting platform right where you need it — without drilling, without cutting, and without compromising your interior.\u003c\/p\u003e\n\n\u003cp\u003eThe bar mounts directly to the \u003cstrong\u003efactory A-pillar bolts\u003c\/strong\u003e using the stock hardware points, so installation is clean and reversible. It does not interfere with instrument visibility or driver sightlines.\u003c\/p\u003e\n\n\u003ch2\u003eTundra \/ Sequoia 3rd Gen — Important Installation Note\u003c\/h2\u003e\n\n\u003cp\u003eOn the Tundra 3rd Gen and Sequoia 3rd Gen, the factory OEM grab handle cannot be reinstalled once the bar is mounted due to the A-pillar bolt configuration. \u003cstrong\u003eThe DTR FAB bar includes a solid replacement handle that fits perfectly in the OEM space\u003c\/strong\u003e — same location, clean look, solid feel. Your passenger still has a handle. It just looks better.\u003c\/p\u003e\n\n\u003ch2\u003eOne Bar. Two Platforms.\u003c\/h2\u003e\n\n\u003cp\u003eThe Tundra 3rd Gen and Sequoia 3rd Gen share the same dashboard and A-pillar dimensions, so \u003cstrong\u003ethis single bar fits both vehicles perfectly\u003c\/strong\u003e. Same geometry, same bolt pattern, same clean install — whether you’re running a Tundra or a Sequoia.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Accessory Compatibility\u003c\/h2\u003e\n\n\u003cp\u003eThe bar features a \u003cstrong\u003e1.37\" (34mm) outer diameter tube\u003c\/strong\u003e — the industry-standard size used across motorcycle, UTV, and off-road accessory mounting systems. Compatible with RAM Mounts, Quad Lock, and the full range of 34mm clamp-based accessories available on Amazon and at any off-road retailer.\u003c\/p\u003e\n\n\u003cp\u003eMount your phone. Mount your iPad. Mount your switch panel, your intercom, your cup holder, your GPS. Configure your cockpit exactly the way you want it.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned for Off-Road and Heavy-Duty Use\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts to factory A-pillar bolts\u003c\/strong\u003e — no drilling, no permanent modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes solid replacement grab handle\u003c\/strong\u003e — replaces OEM handle that cannot be reinstalled, fits perfectly in the factory location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not obstruct driver visibility\u003c\/strong\u003e — instruments and windshield sightlines remain clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.37\" \/ 34mm OD tube\u003c\/strong\u003e — compatible with RAM Mounts and all standard 34mm clamp accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not block airbag deployment zones\u003c\/strong\u003e — airbag openings remain unobstructed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFabricated in-house in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFinish \u0026amp; Color Options\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eBlack powder coat is included in the price\u003c\/strong\u003e — your bar ships ready to install in black at no additional cost.\u003c\/p\u003e\n\n\u003cp\u003eNeed a special color? Contact us before placing your order to check availability. Custom colors are available for an additional \u003cstrong\u003e$35\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\n\n\u003cp\u003eWhile this bar does not block airbag deployment zones, \u003cstrong\u003ewe strongly recommend against mounting accessories or clamps in the area directly in front of or adjacent to any airbag\u003c\/strong\u003e. In the event of airbag deployment, any mounted object in that zone could become a hazard. Mount accessories toward the center of the bar and away from airbag zones.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube OD:\u003c\/strong\u003e 1.37\" \/ 34mm — industry-standard clamp size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Points:\u003c\/strong\u003e Factory A-pillar bolts — no drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Solid replacement grab handle — fits OEM location\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories:\u003c\/strong\u003e RAM Mounts, Quad Lock, and all 34mm clamp-based systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Colors:\u003c\/strong\u003e Available upon request — +$35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota Tundra 3rd Gen 2022+ \/ Toyota Sequoia 3rd Gen 2023+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota Tundra 3rd Generation — 2022 \/ 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\u003cp\u003eToyota Sequoia 3rd Generation — 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e1 week\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips within the United States. Standard ground rates apply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAccessory mounts, phone holders, cup holders, and switches not included. Solid replacement grab handle included.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"black powder coated (included)","offer_id":53183611601212,"sku":"DTR-DAB-TUN3G-01","price":240.0,"currency_code":"USD","in_stock":true},{"title":"special color +$35","offer_id":53183611633980,"sku":"DTR-DAB-TUN3G-02","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_5154.jpg?v=1783213084"},{"product_id":"toyota-tundra-3rd-gen-front-bumper","title":"Toyota Tundra 3rd Gen Front Bumper","description":"\u003ch2\u003eFull-Size Truck. Full-Size Protection.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Front Bumper for the Toyota Tundra 3rd Generation is built to match the scale and capability of the platform it goes on. Fabricated entirely from \u003cstrong\u003e3\/16\" steel\u003c\/strong\u003e — every structural component, every gusset, every mount — this is a bumper built to take serious hits and keep going. No hybrid gauges, no compromises. Full thickness throughout.\u003c\/p\u003e\n\n\u003cp\u003eDesigned to integrate cleanly with the Tundra 3rd Gen’s front end, this bumper maintains the truck’s proportions while adding the protection and functionality that the factory bumper cannot provide.\u003c\/p\u003e\n\n\u003ch2\u003eSensor Integration — Engineered for the 3rd Gen\u003c\/h2\u003e\n\n\u003cp\u003eThe Tundra 3rd Gen front end houses multiple sensors that require careful consideration in any aftermarket bumper design. The DTR FAB bumper handles each one correctly:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProximity sensors relocated into the bumper\u003c\/strong\u003e — all factory proximity\/parking sensors are relocated to purpose-built housings integrated into the bumper face. Full functionality maintained after installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront radar sensor remains in factory location\u003c\/strong\u003e — the ADAS radar sensor is not relocated. The bumper is designed around it, preserving all radar-dependent safety systems including adaptive cruise control and pre-collision warning without recalibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWinch-Ready\u003c\/h2\u003e\n\n\u003cp\u003eThe bumper includes a \u003cstrong\u003efull-size winch plate\u003c\/strong\u003e built into the structure — 3\/16\" steel, rated for a full-size winch. When you need recovery capability on a vehicle this size, the mount is already there.\u003c\/p\u003e\n\n\u003ch2\u003eFog Light Pods — Your Choice of Brand\u003c\/h2\u003e\n\n\u003cp\u003eThe bumper features \u003cstrong\u003epre-cut openings sized for round fog light pods\u003c\/strong\u003e compatible with two of the most trusted names in off-road lighting:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaja Designs\u003c\/strong\u003e — S2 Pro, S2 Sport, or equivalent round pod series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKC HiLiTES\u003c\/strong\u003e — Gravity LED Pro, Flex Era, or equivalent round pod series\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe cutouts are sized to fit both brands’ standard round pod format. Select your preferred lighting brand and mount directly — no modification to the bumper required. Lights and wiring not included.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16\" steel throughout — full thickness, no hybrid gauges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch Mount:\u003c\/strong\u003e Integrated full-size winch plate — winch-ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProximity Sensors:\u003c\/strong\u003e Relocated into bumper — fully functional\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadar Sensor:\u003c\/strong\u003e Remains in factory location — no recalibration required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFog Light Openings:\u003c\/strong\u003e Round pod cutouts — compatible with Baja Designs and KC HiLiTES standard round pods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota Tundra 3rd Generation 2022+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota Tundra 3rd Generation — 2022 \/ 2023 \/ 2024 \/ 2025 and newer\u003c\/p\u003e\n\u003cp\u003eAll trim levels\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e3–4 weeks\u003c\/strong\u003e from order confirmation.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips via freight within the United States. Flat or preferred rates to commercial addresses. Additional charges may apply for residential delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFog lights, winch, and accessories not included. Hardware included.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"baja designs","offer_id":53184108265788,"sku":"DTR-FB-TUN3G-01","price":2185.0,"currency_code":"USD","in_stock":true},{"title":"KC hilites","offer_id":53184108298556,"sku":"DTR-FB-TUN3G-02","price":2185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/737B3DF4-560B-4C83-8738-AB84B14CA50A.jpg?v=1783244396"},{"product_id":"toyota-tundra-2nd-gen-model-t-front-bumper","title":"Toyota Tundra 2nd Gen \"Model T\" Front Bumper","description":"\u003ch2\u003eThe Model T. Built Different.\u003c\/h2\u003e\n\n\u003cp\u003eThe DTR FAB Model T Front Bumper for the Toyota Tundra 2nd Generation is one of our most distinctive and capable builds. The Model T combines \u003cstrong\u003e3\/16\" steel plate construction with structural tube elements\u003c\/strong\u003e — a hybrid design that delivers the rigidity and impact resistance of heavy plate where it matters, with the strength-to-weight efficiency of tube in the frame and support structure. The result is a bumper that looks aggressive, performs aggressively, and is built to last.\u003c\/p\u003e\n\n\u003cp\u003ePaired with an \u003cstrong\u003ealuminum skid plate\u003c\/strong\u003e that protects the front undercarriage without adding unnecessary steel weight, the Model T is a complete front protection system — not just a bumper.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Ready — Multiple Positions\u003c\/h2\u003e\n\n\u003cp\u003eThe Model T is built for serious lighting setups. Multiple integrated mounting positions allow you to run a full lighting configuration across the bumper:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple auxiliary light mounts\u003c\/strong\u003e — upper and lower positions for driving lights, spot lights, or flood pods from any major brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFog light bases included\u003c\/strong\u003e — dedicated fog light mounting positions integrated into the bumper face, compatible with standard aftermarket fog light pods\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eRun as many or as few lights as your build requires. The mounting positions are there when you need them.\u003c\/p\u003e\n\n\u003ch2\u003eOEM-Position Recovery Points\u003c\/h2\u003e\n\n\u003cp\u003eThe Model T includes \u003cstrong\u003erecovery points bolted in the OEM factory location\u003c\/strong\u003e — the same position Toyota engineered for recovery loads on the 2nd Gen Tundra frame. These are not welded tabs or body-mounted hooks. They bolt directly into the factory recovery point location, transferring pull loads into the frame exactly as intended. Real recovery points for real recovery situations.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Skid Plate\u003c\/h2\u003e\n\n\u003cp\u003eThe included \u003cstrong\u003ealuminum skid plate\u003c\/strong\u003e protects the front undercarriage — oil pan, transmission, and front differential — from rock strikes and trail debris. Aluminum construction keeps weight down while providing solid protection against impacts that would damage or puncture a steel skid of equivalent thickness.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Hybrid — 3\/16\" steel plate + structural tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkid Plate:\u003c\/strong\u003e Aluminum — included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery Points:\u003c\/strong\u003e Bolt-on at OEM factory location — frame-direct load transfer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Multiple positions — upper and lower auxiliary + fog light bases\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Finish:\u003c\/strong\u003e Black powder coat — included in price\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Toyota Tundra 2nd Generation 2007–2021\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing:\u003c\/strong\u003e Fabricated in-house in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eToyota Tundra 2nd Generation — 2007 \/ 2008 \/ 2009 \/ 2010 \/ 2011 \/ 2012 \/ 2013 \/ 2014 \/ 2015 \/ 2016 \/ 2017 \/ 2018 \/ 2019 \/ 2020 \/ 2021\u003c\/p\u003e\n\u003cp\u003eAll cab and bed configurations: Regular Cab, Double Cab, CrewMax\u003c\/p\u003e\n\n\u003ch2\u003eLead Time\u003c\/h2\u003e\n\n\u003cp\u003eBuilt to order. Current lead time is \u003cstrong\u003e6 weeks\u003c\/strong\u003e from order confirmation. The Model T is one of our most complex builds — this lead time reflects the craftsmanship and precision that goes into every unit.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\n\u003cp\u003eShips via freight within the United States. Flat or preferred rates to commercial addresses. Additional charges may apply for residential delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eAuxiliary lights, fog lights, and winch not included. Aluminum skid plate included. Hardware included.\u003c\/em\u003e\u003c\/p\u003e","brand":"DTR FAB","offers":[{"title":"no","offer_id":53184157188412,"sku":"DTR-FB-TUN2G-MT-01","price":1750.0,"currency_code":"USD","in_stock":true},{"title":"aluminum skid plate +$400","offer_id":53184157221180,"sku":"DTR-FB-TUN2G-MT-02","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/files\/IMG_1635.jpg?v=1783244948"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/1904\/9788\/collections\/737B3DF4-560B-4C83-8738-AB84B14CA50A.jpg?v=1786295906","url":"https:\/\/www.dtrfab4x4.com\/collections\/tundra-1.oembed","provider":"DTR fab","version":"1.0","type":"link"}