Toyota 4Runner 5th Gen High Clearance Rear Swing-Out Bumper

The Last Rear Bumper You’ll Ever Need.

The DTR FAB High Clearance Rear Swing-Out Bumper for the Toyota 4Runner 5th Generation is the most versatile and capable rear bumper in our lineup. Built for serious off-road use, overland travel, and trail camping — this bumper does more than protect your rear end. It becomes a platform for everything you need behind the truck.

High clearance geometry keeps the bumper out of the way on steep descents and off-camber exits. The swing-out design gives you full, unobstructed access to the rear of the vehicle without removing anything. And the modular add-on system means you configure it exactly for your build — spare tire carrier, camp table, side hoops, or all three.

Blind Spot Sensor Compatible — No Relocation Required

The DTR FAB rear bumper is designed to work with the factory Blind Spot Monitoring (BSM) sensors found on equipped 5th Gen models. The sensor housings remain in their factory location — no relocation, no recalibration, no loss of function. Blind spot monitoring works exactly as it did from the factory.

Spare Tire Carrier — Tested to 37"

The optional swing-out spare tire arm is engineered to carry a full-size spare — and we’ve tested it with tires up to 37 inches. The arm swings out independently from the bumper, giving you full rear access even with the spare mounted. The pivot and latch system is solid, rattle-free, and built to handle the weight of a large tire on rough terrain without flex or play.

Integrated Hitch Receiver

The bumper includes a built-in hitch receiver — no separate hitch needed, no additional drilling, no compromises. Tow your trailer, mount your bike rack, or run a hitch-mounted accessory directly from the bumper. The receiver is integrated into the bumper structure for maximum strength and a clean, factory-integrated look.

Chassis-Direct Recovery Points

The DTR FAB rear bumper features recovery points that anchor directly to the chassis — not to the bumper skin or body panels. When you’re stuck and need to be pulled out, the recovery load goes straight into the frame where it belongs. These are real recovery points built for real recovery situations.

Add-On Options

The DTR FAB rear bumper is available with the following optional add-ons — select what you need at checkout:

• Spare Tire Arm — swing-out carrier for full-size spare up to 37". Swings independently from the bumper for full rear access.
• Camp Table — fold-out table that mounts to the swing-out arm. Deploys in seconds at camp, folds flat for trail use.
• Side Hoops — corner protection hoops that extend coverage to the rear quarter panels. Adds trail protection and aggressive styling.

High Clearance Design

The bumper is designed with a high clearance profile — the lower edge is tucked up to maximize departure angle on steep descents, rock exits, and off-camber terrain. No more dragging your rear bumper on obstacles that your suspension can handle.

Installation Note

Installation requires precise cutting of the factory rear plastic bumper cover. This is not a simple trim cut — it requires careful measurement and clean execution to achieve a proper fit and finish. We strongly recommend professional installation by a qualified shop experienced with aftermarket bumper fitment. Improper cuts will affect the final appearance and fitment of the bumper.

Specifications

• Style: High clearance swing-out rear bumper
• Swing-Out: Full swing-out access to rear of vehicle
• Hitch Receiver: Integrated — built into bumper structure
• Recovery Points: Chassis-direct — load transfers to frame
• Blind Spot Sensors: Compatible — no relocation required
• Spare Tire Capacity: Tested to 37" tires (optional arm)
• Add-On Options: Spare tire arm / Camp table / Side hoops
• Material: Steel — fabricated in-house
• Standard Finish: Black powder coat — included in price
• Installation: Requires precise cutting of factory rear plastic cover — professional installation strongly recommended
• Sold as: Bumper only — add-ons selected at checkout
• Fitment: Toyota 4Runner 5th Generation 2010–2024 — all trim levels
• Manufacturing: Fabricated in-house in the USA

Compatibility

Toyota 4Runner 5th Generation — 2010 / 2011 / 2012 / 2013 / 2014 / 2015 / 2016 / 2017 / 2018 / 2019 / 2020 / 2021 / 2022 / 2023 / 2024

All trim levels: SR5 / Trail / TRD Off-Road / TRD Pro / Limited

Blind Spot Monitoring compatible: all BSM-equipped models, no sensor relocation required

Lead Time

Built to order. Current lead time is 3–4 weeks from order confirmation.

Shipping

Ships via freight within the United States. Flat or preferred rates to commercial addresses. Additional charges may apply for residential delivery.

Bumper sold as base unit. Spare tire arm, camp table, and side hoops are optional add-ons selected at checkout. Hardware included. Spare tire not included. Professional installation recommended.