Toyota Land Cruiser 80 Series / Lexus LX450 Rear Differential 4-Inch Panhard Correction Bracket

Rear Differential Correction for the 80 Series.

The DTR FAB Panhard Correction Bracket for the Toyota Land Cruiser 80 Series and Lexus LX450 is a weld-on bracket designed for the rear differential / rear axle of the vehicle. It raises or relocates the rear track bar, also known as the rear panhard bar, approximately 4 inches higher for a more practical custom suspension setup.

This is a weld-on rear differential bracket built for custom installation on the 80 Series platform. It includes an extra bolt and spacer to help complete the installation, but welding is required. This is not a bolt-on part.

Approximately 4 Inches of Rear Correction

When the factory rear track bar location is no longer ideal for your build, this correction bracket provides a solid mounting solution at the rear differential / rear axle for raising or relocating the rear panhard bar approximately 4 inches. It is designed for custom 80 Series rear suspension work where proper positioning and alignment matter.

Installation Hardware Included

• Rear differential / rear axle application — designed for the back of the vehicle
• Approximately 4-inch rise — raises the rear track bar / panhard bar mounting position
• Weld-on design — requires welding for installation
• Rear track bar / panhard correction — raises or relocates the rear mounting position
• Extra installation bolt included
• Installation spacer included
• Raw steel finish — supplied unpainted with no powder coat
• Built for custom fabrication — professional welding and proper alignment required
• Fabricated by DTR FAB

Specifications

• Application: Toyota Land Cruiser 80 Series / Lexus LX450
• Location: Rear differential / rear axle
• Function: Rear track bar / rear panhard bar correction and relocation
• Height correction: Approximately 4 inches
• Installation: Weld-on
• Included: Extra installation bolt and spacer
• Finish: Raw steel, unpainted — no powder coat
• Manufacturer: DTR FAB

Fitment

Toyota Land Cruiser 80 Series — rear differential / rear axle application

Lexus LX450 — rear differential / rear axle application

Important: Welding is required for installation. This bracket is not a bolt-on component. Installation should be performed by a qualified fabricator, with the bracket properly positioned and the rear suspension geometry checked before final welding.